Emission impacts of China's solid waste import ban and COVID-19 in the copper supply chain.

Climate change will increase the frequency and severity of supply chain disruptions and large-scale economic crises, also prompting environmentally protective local policies. Here we use econometric time series analysis, inventory-driven price formation, dynamic material flow analysis, and life cycle assessment to model each copper supply chain actor's response to China's solid waste import ban and the COVID-19 pandemic. We demonstrate that the economic changes associated with China's solid waste import ban increase primary refining within China, offsetting the environmental benefits of decreased copper scrap refining and generating a cumulative increase in CO2-equivalent emissions of up to 13 Mt by 2040. Increasing China's refined copper imports reverses this trend, decreasing CO2e emissions in China (up to 180 Mt by 2040) and globally (up to 20 Mt). We test sensitivity to supply chain disruptions using GDP, mining, and refining shocks associated with the COVID-19 pandemic, showing the results translate onto disruption effects.

Volatile fatty acid platform - a cornerstone for the circular bioeconomy.

Annually, the EU produces more than 100 million tonnes of urban biowaste, which is largely under-valorized and in some cases even still landfilled without any energy or material recovery. If Europe wants to be ready for the future, it will need to make better use of this large biomass potential within a circular economy approach. The research project funded by the European Commission under the Horizon 2020 programme entitled 'VOLATILE-Biowaste derived volatile fatty acid platform for biopolymers, bioactive compounds and chemical building blocks' aimed to produce volatile fatty acids (VFAs) from biowaste for reprocessing into products, materials or substances to close the material loop. During the project, the partners were able to obtain average volatile fatty acid yields of 627 g COD/kg organic matter (OM) for food waste, 448 g COD/kg OM for separately collected vegetable, garden and fruit waste (VGF) and 384 g COD/kg OM for the organic fraction of municipal solid waste (OF-MSW) at concentrations ranging from 12 to 48 g/L, 6 to 40 g/L and 13 to 26 g/L, respectively. A membrane filtration cascade consisting of micro-, ultra- and nano-filtration followed by reverse osmosis was identified as a feasible way to purify and concentrate the VFA effluent, making them a suitable carbon source for further fermentation processes. Besides technical optimization, socio-economic and legal aspects associated with this platform technology were also studied and show that although this technology is still in development, it is providing an answer to changing societal and market expectations both regarding organic waste treatment and bio-based production strategies. Based on the current technological, economic and market evolutions, it is expected that the VFAP will play an important role in organic waste treatment in the coming years.

Variables Influencing per Capita Production, Separate Collection, and Costs of Municipal Solid Waste in the Apulia Region (Italy): An Experience of Deep Learning.

Municipal solid waste (MSW) must be managed to reduce its impact on environmental matrices and population health as much as possible. In particular, the variables that influence the production, separate waste collection, and costs of MSW must be understood. Although many studies have shown that such factors are specific to an area, the awareness of these factors has created opportunities to implement operations to enable more effective and efficient MSW management services, and to specifically respond to the variables that have the most impact. The deep learning approaches used in this study are effective in achieving this goal and can be used in any other territorial context to ensure that the organizations that deal with these issues are more aware and create useful plans to promote the circular economy. Our findings indicate the important influence of number of rooms in a residential buildings and construction years on MSW production, the combination of services such as municipal collection centers and door-to-door service for separate MSW collection and the characteristics of the residential buildings in the municipalities on MSW management costs.

Temporal assessment of municipal solid waste management in Nigeria: prospects for circular economy adoption.

This work reviewed the past and current status of municipal solid waste (MSW) management in Nigeria towards offering a direction for the future. The past status shows that poor policy regimes, inadequate financing mechanisms, absence of waste data, and abysmal institutional arrangement negatively impacted the MSW management outcomes in the country. At present, few improvements recorded like an increase in the number of landfills, and public-private partnerships have been largely undermined by the continuous upsurge in the urban population and lack of corresponding growth in critical capacities in terms of economic resources, technological advancement, and state-of-the-art urban infrastructures. The current waste generated in cities in Nigeria is calculated as 66,828 tonnes per day (TPD) at the total urban population of 106 million, while the projected value for 2040 will be 125,473 TPD at the urban population of 199 million. The current work further discusses prospects and implications for circular economy adoption in solid waste valorization in Nigeria.

Sustainable financing for municipal solid waste management in Nepal.

Financing municipal solid waste (MSW) services is one of the key challenges faced by cities in developing countries. This study used plastic waste, a constituent of MSW, to explore the possibility of generating revenue for financing MSW management in the municipalities of Nepal. The results of this study suggest that plastic material recovery could generate revenue, which is equivalent to 1.38 times of the plastic-waste-related management cost when collection efficiency reaches 66.7%. An increase in 1% of recovery rate and collection efficiency could cover an additional 4.64% and 2.06% of the costs of managing plastic waste, respectively. In addition, an increase in tax on imported plastic materials could also motivate recovery of plastic waste for recycle and reuse. An additional 1% tax on plastic imports would be sufficient to cover plastic-related waste management when plastic waste recovery and collection efficiency rates are low. This plastic recovery- revenue exercise could be expanded to other materials such as paper and metal to fully understand the possibility of sustainable financing of MSW management and reducing environmental harm in developing countries like Nepal.

Corruption and Solid Waste Management in Mbarara Municipality, Uganda.

Mbarara Municipality in Western Uganda has for many years struggled to manage municipal solid waste. Leaders in this municipality have mainly attributed this persistent problem to poor financing, failure to enforce existing solid waste management laws and regulations, limited community participation, deprived attitude by the public towards waste collection, and tendency of municipal dwellers to litter. No in-depth academic study in Mbarara Municipality has ever been done to expose and illustrate how corruption directly happens and influence solid waste management. This study fills this knowledge gap by illustrating how corruption influences poor solid waste management in Mbarara Municipality. The study finds that municipal technical officials, garbage truck drivers, their turn boys, garbage sorters, factory owners, and private land grabbers all involved in different forms of corruption have directly and indirectly turned solid waste collection and disposal into a very costly problem to the municipal council and the general public. The article recommends that fighting corruption in all its forms without fear or favor, encouraging them to play their role particularly in sorting waste, adoption of smart technologies, and putting in place measures that attract private investors while protecting the public can help in the effective management of solid waste in Mbarara Municipality.

Online Simulation Model to Estimate the Total Costs of Tobacco Product Waste in Large U.S. Cities.

Tobacco product waste (TPW) is one of the most ubiquitous forms of litter, accumulating in large amounts on streets, highways, sidewalks, beaches, parks, and other public places, and flowing into storm water drains, waste treatment plants, and solid waste collection facilities. In this paper, we evaluate the direct and indirect costs associated with TPW in the 30 largest U.S. cities. We first developed a conceptual framework for the analysis of direct and indirect costs of TPW abatement. Next, we applied a simulation model to estimate the total costs of TPW in major U.S. cities. This model includes data on city population, smoking prevalence rates, and per capita litter mitigation costs. Total annual TPW-attributable mean costs for large US cities range from US$4.7 million to US$90 million per year. Costs are generally proportional to population size, but there are exceptions in cities that have lower smoking prevalence rates. The annual mean per capita TPW cost for the 30 cities was US$6.46, and the total TPW cost for all 30 cities combined was US$264.5 million per year. These estimates for the TPW-attributable cost are an important data point in understanding the negative economic externalities created by cigarette smoking and resultant TPW cleanup costs. This model provides a useful tool for states, cities, and other jurisdictions with which to evaluate a new economic cost outcome of smoking and to develop new laws and regulations to reduce this burden.

Utilization of Fish Waste as Fish Feed Material as an Alternative Effort to Reduce and Use Waste.

BACKGROUND AND OBJECTIVE: Waste of fish catching and waste of fish fillet processing will cause environmental pollution, but these materials can still be used as raw material for fish feed. The objective of this research was to change fish wastes to be made as fish powder as raw material of fish feed. MATERIALS AND METHODS: This research employed a completely randomized design with three treatments; Treatment A is artificial feed that uses raw material from trash fish, Treatment B is artificial feed that uses raw material from fish fillet waste and as control is factory-made feed. The silver pompano fish stocking was done with stocking density of 20 fishes m-3. The fishes were cultured for 60 days and they were adapted with formulated feed during 7 days before testing. RESULTS: Fish powder material in Treatment A coming from trash fish waste had good enough protein content by 43.84%, while fish powder material in Treatment B coming from fish fillet waste had lower protein content by 36.3%. The results showed that the control produced better growth activity indicators compared to Treatment A and B. The results of economic analysis showed that Treatment A and B were cheaper to produce compared to control. CONCLUSION: Fisheries waste both fish catch and fish fillet waste can be used as raw material for making silver pompano fish feed. Utilization of the two wastes has two functions namely saving on aquaculture costs and reducing fisheries waste.

Organic Waste Buyback as a Viable Method to Enhance Sustainable Municipal Solid Waste Management in Developing Countries.

Many developing countries have inadequate Municipal Solid Waste (MSW) management systems due to lack of not only the awareness, technologies, finances, but also a proper governance that is able to enforce and monitor the regulations. Not all the solutions practiced by and in developed countries fit to the developing country contexts. The local conditions and limitations must always be taken into account when proposing waste management options for developing countries. The excessively high organic waste fraction in MSW and relatively inexpensive labor markets available in developing countries are two of the strengths that have not yet been utilized fully. This manuscript is an attempt to point out the benefits we receive from the above two strengths if we establish organic waste buyback programs. This can only become successful if we find solutions to: (1) collect source-separated organic waste, and then (2) find stable markets for the products made from organic waste. Compost or biogas could be the best bet developing countries can consider as products. However, there must be some policy interventions to support buyback programs at the waste collection stage as well as at the product marketing stage. Implementation of such organic waste buyback centers that can offer some incentives can indirectly motivate residents to do source separation. This will in turn also help promote more recycling, as any waste bin that has no organics in it is much easier for anyone (e.g., waste pickers) to look for other recyclables. Developing country settings such as the Green Container composting program in Cajicá, Colombia, and buyback centers in South Africa that are presented later in the manuscript are thought to be the places where the concept can be implemented with little effort. The environment, economy, and society are considered to be the three dimensions (or pillars) of sustainability. Interestingly, the organic waste buyback centers solution has positive implications on all three aspects of sustainability. Thus, it also supports the 2030 Agenda of the United Nations (UN), by making specific contributions to the Sustainable Development Goals (SDGs) such as zero hunger (SDG 2), affordable and clean energy (SDG 7), climate action (SDG 13), clean water and sanitation (SDG 6), and sustainable cities and communities (SDG 11).

A multi-objective model for sustainable recycling of municipal solid waste.

The efficient management of municipal solid waste is a major problem for large and populated cities. In many countries, the majority of municipal solid waste is landfilled or dumped owing to an inefficient waste management system. Therefore, an optimal and sustainable waste management strategy is needed. This study introduces a recycling and disposal network for sustainable utilisation of municipal solid waste. In order to optimise the network, we develop a multi-objective mixed integer linear programming model in which the economic, environmental and social dimensions of sustainability are concurrently balanced. The model is able to: select the best combination of waste treatment facilities; specify the type, location and capacity of waste treatment facilities; determine the allocation of waste to facilities; consider the transportation of waste and distribution of processed products; maximise the profit of the system; minimise the environmental footprint; maximise the social impacts of the system; and eventually generate an optimal and sustainable configuration for municipal solid waste management. The proposed methodology could be applied to any region around the world. Here, the city of Tehran, Iran, is presented as a real case study to show the applicability of the methodology.

Operationalisation of service quality in household waste collection.

Since 2007, there has been intensive discussion at European and national levels concerning the standardisation of services including those in the sector of waste management. The drafts of the European standard prEN 16250 and the German preliminary standard DIN SPEC 1108 are intended to establish a uniform definition of corresponding services and their (minimum) service levels. Their binding application in practice requires that systematic inspections be provided to ascertain to what degree a service has been carried out as agreed upon. However, both standardisation projects give only a few examples of potential quality characteristics and offer no concrete information concerning methods of measurement. Because intersectoral or cross-service quality inspections do not exist, there is a need for the development of specific quality inspections. The study introduced in this article examines the question of how the service quality of door-to-door waste collection can be systematically measured. To this end, the quality concept applied to the process of waste collection was first concretised and then operationalised using indicators. Based upon this, the methods of the quality inspections were developed and subjected to a trial of their applicability in a German waste management company. The methods for measuring and evaluating take into account, in addition to the different boundary conditions of collection, also the possible customer influence on the collection process and consequently on the service performed by the collection crew. In order to avoid time- and therefore cost-intensive exhaustive surveys, a multilevel random-controlled selection of survey units was developed, too. Based on the analysis of the measurement data, it was possible to determine specific time requirement values for the regular performance of the data surveys, as well as minimum sample sizes as a function of the number of container locations of the waste collection tours. On the basis of this information, it has been possible to make initial statements concerning the personnel requirement for quality inspections. Moreover, it is possible to make recommendations concerning the daily working-time schedule for a quality manager in order to achieve the most efficient performance of quality inspections possible.

Municipal household solid waste fee based on an increasing block pricing model in Beijing, China.

This article aims to design an increasing block pricing model to estimate the waste fee with the consideration of the goals and principles of municipal household solid waste pricing. The increasing block pricing model is based on the main consideration of the per capita disposable income of urban residents, household consumption expenditure, production rate of waste disposal industry, and inflation rate. The empirical analysis is based on survey data of 5000 households in Beijing, China. The results indicate that the current uniform price of waste disposal is set too high for low-income people, and waste fees to the household disposable income or total household spending ratio are too low for the medium- and high-income families. An increasing block pricing model can prevent this kind of situation, and not only solve the problem of lack of funds, but also enhance the residents' awareness of environmental protection. A comparative study based on the grey system model is made by having a preliminary forecast for the waste emissions reduction effect of the pay-as-you-throw programme in the next 5 years of Beijing, China. The results show that the effect of the pay-as-you-throw programme is not only to promote the energy conservation and emissions reduction, but also giving a further improvement of the environmental quality.

Does recyclable separation reduce the cost of municipal waste management in Japan?

Municipal solid waste (MSW) management is a system involving multiple sub-systems that typically require demanding inputs, materials and resources to properly process generated waste throughput. For this reason, MSW management is generally one of the most expensive services provided by municipalities. In this paper, we analyze the Japanese MSW management system and estimate the cost elasticity with respect to the waste volumes at three treatment stages: collection, processing, and disposal. Although we observe economies of scale at all three stages, the collection cost is less elastic than the disposal cost. We also examine whether source separation at home affects the cost of MSW management. The empirical results show that the separate collection of the recyclable fraction leads to reduced processing costs at intermediate treatment facilities, but does not change the overall waste management cost. Our analysis also reveals that the cost of waste management systems decreases when the service is provided by private companies through a public tender. The cost decreases even more when the service is performed under the coordination of adjacent municipalities.

Economic screening of renewable energy technologies: Incineration, anaerobic digestion, and biodiesel as applied to waste water scum.

In the U.S., the total amount of municipal solid waste is continuously rising each year. Millions of tons of solid waste and scum are produced annually that require safe and environmentally sound disposal. The availability of a zero-cost energy source like municipal waste scum is ideal for several types of renewable energy technologies. However, the way the energy is produced, distributed and valued also contributes to the overall process sustainability. An economic screening method was developed to compare the potential energy and economic value of three waste-to-energy technologies; incineration, anaerobic digestion, and biodiesel. A St. Paul, MN wastewater treatment facility producing 3175 "wet" kilograms of scum per day was used as a basis of the comparison. After applying all theoretically available subsidies, scum to biodiesel was shown to have the greatest economic potential, valued between $491,949 and $610,624/year. The incineration of scum yielded the greatest reclaimed energy potential at 29billion kilojoules/year.

Search for a new economic optimum in the management of household waste in Tiaret city (western Algeria).

In household waste matters, the objective is always to conceive an optimal integrated system of management, where the terms 'optimal' and 'integrated' refer generally to a combination between the waste and the techniques of treatment, valorization and elimination, which often aim at the lowest possible cost. The management optimization of household waste using operational methodologies has not yet been applied in any Algerian district. We proposed an optimization of the valorization of household waste in Tiaret city in order to lower the total management cost. The methodology is modelled by non-linear mathematical equations using 28 variables of decision and aims to assign optimally the seven components of household waste (i.e. plastic, cardboard paper, glass, metals, textiles, organic matter and others) among four centres of treatment [i.e. waste to energy (WTE) or incineration, composting (CM), anaerobic digestion (ANB) or methanization and landfilling (LF)]. The analysis of the obtained results shows that the variation of total cost is mainly due to the assignment of waste among the treatment centres and that certain treatment cannot be applied to household waste in Tiaret city. On the other hand, certain techniques of valorization have been favoured by the optimization. In this work, four scenarios have been proposed to optimize the system cost, where the modelling shows that the mixed scenario (the three treatment centres CM, ANB, LF) suggests a better combination of technologies of waste treatment, with an optimal solution for the system (cost and profit).

From collision to collaboration - Integrating informal recyclers and re-use operators in Europe: A review.

The European Union hosts some of the world's most developed waste management systems and an ambitious policy commitment to the circular economy. The existence of informal recycling and re-use activities in Europe has been vigorously denied until quite recently, and remains a very challenging subject for the European solid waste management sector, as well as for European government and private institutions. In countries ranging from Malta to Macedonia and from France to Turkey, informal recyclers excluded from legal recycling niches increasingly collide with formalised and controlled European Union approaches to urban waste management, packaging recovery schemes, formal re-use enterprises, and extended producer responsibility systems.This review focuses on the period from 2004 through the first half of 2016. The 78 sources on European (and neighbouring) informal recycling and re-use are contextualised with global sources and experience. The articles focus on informal recovery in and at the borders of the European Union, document the conflicts and collisions, and elaborate some constructive approaches towards legalisation, integration, and reconciliation. The overarching recommendation, to locate the issue of informal recovery and integration in the framework of the European circular economy package, is supported by four specific pillars of an integration strategy: Documentation, legalisation, occupational and enterprise recognition, and preparation for structural integration.

The UK waste input-output table: Linking waste generation to the UK economy.

In order to achieve a circular economy, there must be a greater understanding of the links between economic activity and waste generation. This study introduces the first version of the UK waste input-output table that could be used to quantify both direct and indirect waste arisings across the supply chain. The proposed waste input-output table features 21 industrial sectors and 34 waste types and is for the 2010 time-period. Using the waste input-output table, the study results quantitatively confirm that sectors with a long supply chain (i.e. manufacturing and services sectors) have higher indirect waste generation rates compared with industrial primary sectors (e.g. mining and quarrying) and sectors with a shorter supply chain (e.g. construction). Results also reveal that the construction, mining and quarrying sectors have the highest waste generation rates, 742 and 694 tonne per £1m of final demand, respectively. Owing to the aggregated format of the first version of the waste input-output, the model does not address the relationship between waste generation and recycling activities. Therefore, an updated version of the waste input-output table is expected be developed considering this issue. Consequently, the expanded model would lead to a better understanding of waste and resource flows in the supply chain.

Resource recovery from waste by Roma in the Balkans: A case study from Zavidovici (BiH).

Roma communities represent the main involved actors in the informal activities in the Balkan regions, especially because the state does not formally recognize them as formal inhabitants. The Roma community in Zavidovici, despite being resident since the beginning of the 20th century, is still considered a marginalized and vulnerable group. They are actively involved in and dependent on the informal solid waste sector. Waste collection is a 'family business', a kind of self-employment and the main source of income for households. Informal recyclers have a central role in the solid waste management system and they recover a significant amount of materials, especially iron, copper, brass, lead and exhausted batteries. Despite the negative fluctuations of the raw material prices, because of the international economic crisis, informal recyclers remain dependent on the waste recycling sector. They are crucial actors in the value chain of recyclables: though they cannot access the final buyers of recyclables, they provide more than 50% of the market to the middle dealers in the Zenica-Doboj Canton. This research activity consists of a deep socio-economic analysis of the informal recyclers' community living in Zavidovici city. In particular, this paper describes the composition and welfare status of informal recyclers' households, the role of informal recyclers in waste collection, the geographical coverage and the related pattern of waste picking, types, volumes and price fluctuations of recyclable materials, and the middle dealers involved in the informal recycling system.

Assessment of economic instruments for countries with low municipal waste management performance: An approach based on the analytic hierarchy process.

Economic instruments provide significant potential for countries with low municipal waste management performance in decreasing landfill rates and increasing recycling rates for municipal waste. In this research, strengths and weaknesses of landfill tax, pay-as-you-throw charging systems, deposit-refund systems and extended producer responsibility schemes are compared, focusing on conditions in countries with low waste management performance. In order to prioritise instruments for implementation in these countries, the analytic hierarchy process is applied using results of a literature review as input for the comparison. The assessment reveals that pay-as-you-throw is the most preferable instrument when utility-related criteria are regarded (wb = 0.35; analytic hierarchy process distributive mode; absolute comparison) mainly owing to its waste prevention effect, closely followed by landfill tax (wb = 0.32). Deposit-refund systems (wb = 0.17) and extended producer responsibility (wb = 0.16) rank third and fourth, with marginal differences owing to their similar nature. When cost-related criteria are additionally included in the comparison, landfill tax seems to provide the highest utility-cost ratio. Data from literature concerning cost (contrary to utility-related criteria) is currently not sufficiently available for a robust ranking according to the utility-cost ratio. In general, the analytic hierarchy process is seen as a suitable method for assessing economic instruments in waste management. Independent from the chosen analytic hierarchy process mode, results provide valuable indications for policy-makers on the application of economic instruments, as well as on their specific strengths and weaknesses. Nevertheless, the instruments need to be put in the country-specific context along with the results of this analytic hierarchy process application before practical decisions are made.